Cold storage construction requirements standards and peripheral requirements

As an important facility for food and drug storage, cold storage construction is essential. In order to ensure the safety of food and drug storage, cold storage in the construction process must comply with the relevant construction standards, many want to build their own cold storage or small cold storage engineering business, this is not very well understood, HAOCOOL refrigeration as a cold storage project with nearly 20 years of experience in the supply of manufacturers, the following for you to briefly overview of the cold storage construction standards and peripheral requirements.

First of all, cold storage construction needs to follow strict design standards. This includes structural design, adiabatic design, ventilation system design, power distribution system design and so on. Structural design requires the cold storage to have sufficient load-bearing capacity and earthquake resistance to ensure safety. Adiabatic design requires the cold storage to have good heat preservation performance to ensure stable internal temperature. Ventilation system design needs to consider air circulation and humidity control. The design of power distribution system should meet the power demand of various equipments in the cold storage.

Secondly, the surrounding requirements of the cold storage also need attention. The first is the choice of geographical location. Cold storage should be chosen to be close to the source of supply and transport routes in order to facilitate the transport and delivery of goods. Next is the requirement of land area and land condition. Cold stores should have sufficient land area to accommodate buildings and equipment, and the land should comply with the required environmental protection standards. In addition, the surrounding area should also comply with environmental protection and safety requirements to avoid negative impact on the operation of the cold store.

At the same time, the equipment and facilities of the cold storage should also meet the relevant requirements. The cooling system of the cold storage should be able to control the temperature stably and accurately to ensure the storage and preservation of food. The cooling system should also have emergency fault alarm and shutdown protection to ensure safety. In addition, there should be appropriate shelves, storage boxes and other equipment inside the cold room to allow flexible storage and management of goods.

In terms of operation, cold stores need to comply with health and safety requirements. Cold stores should be cleaned and sterilised regularly to ensure food safety and hygiene. Necessary safety equipment, such as fire extinguishers and emergency eyewash, also need to be installed inside the cold storage to ensure safety in case of emergency.

In short, the construction and operation of cold stores need to comply with a series of standards and requirements. These standards and requirements relate to structural design, land requirements, equipment requirements, operational requirements and so on. Following these standards and requirements can ensure the safety, stability and reliability of the cold storage, thus guaranteeing the quality and safety of food during storage and transport. If you have such cold storage construction needs in the near future, please feel free to consult HAOCOOL.